GRUB Loading stage1.5. root (hd0,0) Filesystem type is ext2fs, partition type 0xfd GRUB loading, please wait... [Multiboot-elf, <0x100000:0xe6648:0x609b8> Press any key to continue. , shtab=0x247078, entry=0x100000] [Multiboot-module @ 0x248000, 0x711f98 bytes]console=tty0 console=ttyS0 module /boot/initrd.img-2.6.18.8 [Multiboot-module @ 0x95a000, 0xf8ac00 bytes] EN) Xen version 3.2-1 (Debian 3.2.1-2) (waldi@debian.org) (gcc version 4.3.1 (Debian 4.3.1-2) ) Sat Jun 28 09:32:18 UTC 2008 (XEN) Command line: dom0_mem=1024M com1=115200,8n1 console=com1,vga (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 2 MBR signatures (XEN) Found 2 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000e3000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000dffb0000 (usable) (XEN) 00000000dffbe000 - 00000000dffc0000 type 9 (XEN) 00000000dffc0000 - 00000000dffce000 (ACPI data) (XEN) 00000000dffce000 - 00000000e0000000 (ACPI NVS) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffb00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000320000000 (usable) (XEN) System RAM: 12287MB (12582204kB) (XEN) Xen heap: 14MB (14672kB) (XEN) Domain heap initialised: DMA width 32 bits (XEN) Processor #0 7:7 APIC version 20 (XEN) Processor #1 7:7 APIC version 20 (XEN) Processor #2 7:7 APIC version 20 (XEN) Processor #3 7:7 APIC version 20 (XEN) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 (XEN) IOAPIC[1]: apic_id 6, version 32, address 0xfec89000, GSI 48-71 (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1995.068 MHz processor. (XEN) CPU0: VMX disabled by BIOS. (XEN) VMX: failed to initialise. (XEN) CPU0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 (XEN) Booting processor 1/1 eip 8c000 (XEN) CPU1: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 (XEN) Booting processor 2/2 eip 8c000 (XEN) CPU2: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 (XEN) Booting processor 3/3 eip 8c000 (XEN) CPU3: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) Platform timer overflows in 14998 jiffies. (XEN) Platform timer is 14.318MHz HPET (XEN) Brought up 4 CPUs (XEN) xenoprof: Initialization failed. Intel processor model 23 for P6 class family is not supported (XEN) AMD IOMMU: Disabled (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff805967c0 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000312000000->0000000314000000 (253952 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff80200000->ffffffff805967c0 (XEN) Init. ramdisk: ffffffff80597000->ffffffff81521c00 (XEN) Phys-Mach map: ffffffff81522000->ffffffff81722000 (XEN) Start info: ffffffff81722000->ffffffff817224a4 (XEN) Page tables: ffffffff81723000->ffffffff81732000 (XEN) Boot stack: ffffffff81732000->ffffffff81733000 (XEN) TOTAL: ffffffff80000000->ffffffff81800000 (XEN) ENTRY ADDRESS: ffffffff80200000 (XEN) Dom0 has maximum 4 VCPUs (XEN) Initrd len 0xf8ac00, start at 0xffffffff80597000 (XEN) Scrubbing Free RAM: ...............................................................................................................done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 104kB init memory. kernel direct mapping tables up to 40800000 @ 1733000-193a000 Bootdata ok (command line is root=/dev/md0 ro console=tty0 console=ttyS0) Linux version 2.6.18.8 (root@zeus) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #2 SMP Thu Sep 10 14:33:56 CEST 2009 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000040800000 (usable) DMI present. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x06] address[0xfec89000] gsi_base[48]) IOAPIC[1]: apic_id 6, version 32, address 0xfec89000, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Setting APIC routing to xen Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at f1000000 (gap: f0000000:ee00000) Built 1 zonelists. Total pages: 260580 Kernel command line: root=/dev/md0 ro console=tty0 console=ttyS0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 1995.000 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: ffff88000296c000 - ffff88000696c000 Address size: 27 bits PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 941820k/1056768k available (1988k kernel code, 106220k reserved, 825k data, 156k init) Calibrating delay using timer specific routine.. 3991.71 BogoMIPS (lpj=7983429) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20060707 SMP alternatives: switching to SMP code Initializing CPU#1 Initializing CPU#2 Brought up 4 CPUs CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K Initializing CPU#3 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 migration_cost=22 checking if image is initramfs... it is Freeing initrd memory: 15915k freed NET: Registered protocol family 16 ACPI: bus type pci registered mcfg_ioremap: end_bus_number=255 PCI: Using MMCONFIG at e0000000 - efffffff ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing Error attaching device data Error attaching device data Error attaching device data Error attaching device data Error attaching device data Error attaching device data Error attaching device data Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4 (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000109f1 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! pnp: PnP ACPI: found 14 devices xen_mem: Initialising balloon driver. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:07: ioport range 0xa20-0xa9f has been reserved pnp: 00:07: ioport range 0xa00-0xa03 has been reserved pnp: 00:07: ioport range 0xa04-0xa05 has been reserved pnp: 00:07: ioport range 0xa18-0xa1f has been reserved pnp: 00:07: ioport range 0xa90-0xa9f has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:06:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: fde00000-fdefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: fcb00000-fdbfffff PREFETCH window: faa00000-fc9fffff PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: fdc00000-fdcfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: fdd00000-fddfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. GSI 16 sharing vector 0x98 and IRQ 16 ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 48 (level, low) -> IRQ 16 GSI 17 sharing vector 0xA0 and IRQ 17 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 52 (level, low) -> IRQ 17 GSI 18 sharing vector 0xA8 and IRQ 18 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 56 (level, low) -> IRQ 18 GSI 19 sharing vector 0xB0 and IRQ 19 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 19 GSI 20 sharing vector 0xB8 and IRQ 20 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 20 GSI 21 sharing vector 0xC0 and IRQ 21 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 21 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1252587709.188:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability pcie_portdrv_probe->Dev[3510:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability aer: probe of 0000:00:01.0:pcie01 failed with error 1 aer: probe of 0000:00:05.0:pcie01 failed with error 1 aer: probe of 0000:00:09.0:pcie01 failed with error 1 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Xen virtual console successfully installed as xvc0 Event-channel device installed. blktap_device_init: blktap device major 254 blktap_ring_init: blktap ring major: 253 netfront: Initialising virtual ethernet driver. PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 PCI IO multiplexer device installed. ACPI: (supports S0 S4 S5) Freeing unused kernel memory: 156k freed ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x5 ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x6 ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x7 ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x8 usbcore: registered new driver usbfs usbcore: registered new driver hub GSI 22 sharing vector 0xC8 and IRQ 22 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 22, io mem 0xfdfff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 22, io base 0x0000e080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GSI 23 sharing vector 0xD0 and IRQ 23 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 23, io base 0x0000e000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000dc00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000d880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 23 ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 23 ata2: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 23 scsi0 : ata_piix ata1.00: ATA-6, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : ata_piix usb 2-1: new full speed USB device using uhci_hcd and address 2 ata2.00: ATA-6, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 Vendor: ATA Model: ST3500320NS Rev: SN04 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3500320NS Rev: SN04 Type: Direct-Access ANSI SCSI revision: 05 ESB2: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21 ESB2: chipset revision 9 ESB2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off SCSI device sda: drive cache: write through SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off SCSI device sda: drive cache: write through sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through sdb:<6>usb 2-1: configuration #1 chosen from 1 choice sdb1 sdb2 sd 1:0:0:0: Attached scsi disk sdb usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: ServerEngines SE USB Device as /class/input/input0 input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-1 input: ServerEngines SE USB Device as /class/input/input1 input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 md: raid1 personality registered for level 1 md: md0 stopped. md: bind raid1: raid set md0 active with 1 out of 2 mirrors md: md1 stopped. md: bind md: bind raid1: raid set md1 active with 2 out of 2 mirrors EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. udevd version 125 started ts: Compaq touchscreen protocol output intel_rng: FWH not detected input: PC Speaker as /class/input/input2 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 pl2303 4-2:1.0: pl2303 converter detected usb 4-2: pl2303 converter now attached to ttyUSB0 usbcore: registered new driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver EXT3 FS on md0, internal journal loop: loaded (max 64 devices) device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com