smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Momentus 7200.2 Device Model: ST9160823AS Serial Number: 5NK0TSV8 Firmware Version: 3.CME User Capacity: 160.041.885.696 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Nov 9 09:52:35 2010 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 426) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 58) minutes. SCT capabilities: (0x0001) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 066 034 Pre-fail Always - 219640571 3 Spin_Up_Time 0x0003 100 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 001 001 020 Old_age Always FAILING_NOW 321508 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 271276006 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 167864501805087 10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1792 184 Unknown_Attribute 0x0032 100 253 000 Old_age Always - 0 187 Reported_Uncorrect 0x003a 096 096 000 Old_age Always - 4 189 High_Fly_Writes 0x0022 100 100 045 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0032 066 040 000 Old_age Always - 34 (Lifetime Min/Max 34/34) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1 192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 187 193 Load_Cycle_Count 0x001a 001 001 000 Old_age Always - 323903 194 Temperature_Celsius 0x0012 034 060 000 Old_age Always - 34 (0 14 0 0) 195 Hardware_ECC_Recovered 0x0010 083 062 000 Old_age Offline - 219640571 196 Reallocated_Event_Count 0x003e 092 092 000 Old_age Always - 48709224111475 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0000 100 253 000 Old_age Offline - 0 254 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 ATA Error Count: 4 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4 occurred at disk power-on lifetime: 7363 hours (306 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 8b 0a 5b ec Error: UNC at LBA = 0x0c5b0a8b = 207293067 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 90 09 5b ec 00 05:25:06.832 READ DMA 27 00 00 00 00 00 e0 00 05:25:03.953 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 05:25:03.953 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 05:25:03.946 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 05:25:09.751 READ NATIVE MAX ADDRESS EXT Error 3 occurred at disk power-on lifetime: 7363 hours (306 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 8b 0a 5b ec Error: UNC at LBA = 0x0c5b0a8b = 207293067 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 90 09 5b ec 00 05:25:06.832 READ DMA 27 00 00 00 00 00 e0 00 05:25:03.953 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 05:25:03.953 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 05:25:03.946 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 05:25:03.937 READ NATIVE MAX ADDRESS EXT Error 2 occurred at disk power-on lifetime: 7363 hours (306 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 8b 0a 5b ec Error: UNC at LBA = 0x0c5b0a8b = 207293067 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 90 09 5b ec 00 05:25:00.671 READ DMA 27 00 00 00 00 00 e0 00 05:25:03.953 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 05:25:03.953 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 05:25:03.946 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 05:25:03.937 READ NATIVE MAX ADDRESS EXT Error 1 occurred at disk power-on lifetime: 7363 hours (306 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 8b 0a 5b ec Error: UNC at LBA = 0x0c5b0a8b = 207293067 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 90 09 5b ec 00 05:25:00.671 READ DMA c8 00 00 90 08 5b ec 00 05:25:00.667 READ DMA c8 00 00 90 07 5b ec 00 05:25:00.664 READ DMA c8 00 00 90 06 5b ec 00 05:25:00.661 READ DMA c8 00 00 90 05 5b ec 00 05:25:00.658 READ DMA SMART Self-test log structure revision number 1 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.