Pastebin
Paste #1813: smartctl
< previous paste - next paste>
Pasted by root@malbec
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 7200.2
Device Model: ST9160823AS
Serial Number: 5NK0TSV8
Firmware Version: 3.CME
User Capacity: 160.041.885.696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Nov 9 09:52:35 2010 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 58) minutes.
SCT capabilities: (0x0001) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 066 034 Pre-fail Always - 219640571
3 Spin_Up_Time 0x0003 100 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 001 001 020 Old_age Always FAILING_NOW 321508
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 271276006
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 167864501805087
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1792
184 Unknown_Attribute 0x0032 100 253 000 Old_age Always - 0
187 Reported_Uncorrect 0x003a 096 096 000 Old_age Always - 4
189 High_Fly_Writes 0x0022 100 100 045 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 066 040 000 Old_age Always - 34 (Lifetime Min/Max 34/34)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1
192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 187
193 Load_Cycle_Count 0x001a 001 001 000 Old_age Always - 323903
194 Temperature_Celsius 0x0012 034 060 000 Old_age Always - 34 (0 14 0 0)
195 Hardware_ECC_Recovered 0x0010 083 062 000 Old_age Offline - 219640571
196 Reallocated_Event_Count 0x003e 092 092 000 Old_age Always - 48709224111475
197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0032 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0000 100 253 000 Old_age Offline - 0
254 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 4
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4 occurred at disk power-on lifetime: 7363 hours (306 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 8b 0a 5b ec Error: UNC at LBA = 0x0c5b0a8b = 207293067
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 90 09 5b ec 00 05:25:06.832 READ DMA
27 00 00 00 00 00 e0 00 05:25:03.953 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 05:25:03.953 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 05:25:03.946 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 05:25:09.751 READ NATIVE MAX ADDRESS EXT
Error 3 occurred at disk power-on lifetime: 7363 hours (306 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 8b 0a 5b ec Error: UNC at LBA = 0x0c5b0a8b = 207293067
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 90 09 5b ec 00 05:25:06.832 READ DMA
27 00 00 00 00 00 e0 00 05:25:03.953 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 05:25:03.953 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 05:25:03.946 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 05:25:03.937 READ NATIVE MAX ADDRESS EXT
Error 2 occurred at disk power-on lifetime: 7363 hours (306 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 8b 0a 5b ec Error: UNC at LBA = 0x0c5b0a8b = 207293067
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 90 09 5b ec 00 05:25:00.671 READ DMA
27 00 00 00 00 00 e0 00 05:25:03.953 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 05:25:03.953 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 05:25:03.946 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 05:25:03.937 READ NATIVE MAX ADDRESS EXT
Error 1 occurred at disk power-on lifetime: 7363 hours (306 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 8b 0a 5b ec Error: UNC at LBA = 0x0c5b0a8b = 207293067
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 90 09 5b ec 00 05:25:00.671 READ DMA
c8 00 00 90 08 5b ec 00 05:25:00.667 READ DMA
c8 00 00 90 07 5b ec 00 05:25:00.664 READ DMA
c8 00 00 90 06 5b ec 00 05:25:00.661 READ DMA
c8 00 00 90 05 5b ec 00 05:25:00.658 READ DMA
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
New Paste
Go to most recent paste.
